To date, upholstery materials are so diverse range of applied finishes fabrics so wide, offered to clean the tools are so diverse that only information can ensure good care for the fabric. So you should carefully review the composition of the fabric care symbols, codes and recommendations on cleaning products. It should be noted immediately that the expensive high-quality fabric requires an appropriate attitude. The duration of the upholstery is part of the price, and the proper care — pay for the opportunity to prolong youthfulness of your furniture. This is not surprising. So do not be surprised if the road stylish upholstery, so you like your heart, you will find only one icon — dry cleaning. This means only one thing - with the right to itself for this fabric will delight you with its beauty and originality of many years.
Care — the preservation and maintenance of upholstery in good condition and preventive measures. These include, above all, regular treatment couch vacuuming and timely (meaning fast) removal of any substance that can cause the formation of spots. Cleaning - the necessary periodic removal of dirt appears. It is performed either by washing or dry cleaning, or professionally trained technicians. Wash the fabric (mainly refers to removable covers) may be in the cool, warm or hot water with soap or powder. Most often used powders (detergents), which often contain water softeners, air fresheners and antibacterial agents of color. Bleachers may be with or without chlorine. Chlorinated act quickly and effectively, but not suitable for all types of fabrics. Conventional bleaches are slower, but they are cheaper and safer. However, it should be borne in mind that all bleaching agents thinner fibers, so they are not recommended for frequent use. The process of dry cleaning is the immersion of tissue in a cool or heated organic solvent and mechanical friction. The main use solvent - perchlorethylene. The solvents were removed grease contamination, but can not cope with the pollution, soluble only in water. To solve this problem of "charge" a small amount of water and detergent. Sometimes, in addition to the process of dry cleaning fabrics used local stain removal of specific contaminants.
Most painful tissues to respond to the process of pressing and drying in direct sunlight. This applies particularly to tissues containing in its structure a large percentage of natural fibers. They should be dried in a dark cool place. Although in recent years began to appear Upholstery high quality, devoid of this shortcoming.
There are special protective coating to prevent the fabric from the impurities. The most prominent among them - Teflon from the company DuPont and 3M Scotchguard on. The operating principle of the following - around each fiber is created invisible protective coating on the molecular level. It does not allow the fiber to absorb moisture and attracts dust and dirt. The more dense tissue surface, the better the protection. Teflon does not affect the image fading, withstands all modes washes and dry cleaning and ironing fabrics with an average temperature of only optimizes the effect of the protective coating. Spilled liquid droplet rolls in and easily removed by hand movement. Validity of Teflon coating is unlimited and will last as long as your will to live upholstery. Scotchgard also acts like Teflon, but the differences in chemical composition. Most of the spots that appear on the furniture upholstery from our careless handling, refer to one of three categories: liquid, fat and mixed. Contamination of the liquid nature of the removed with clean water and a sponge. If the stain remains, it should be treated with a wet brush and detergent and dry. Oily stains are cleaned with a sponge dampened with the recommended solvent. In some cases, a good helping of ethyl alcohol (lipstick, white wine, fruit juice) or foam neutral detergent (coffee, tea, chocolate). Excellent job with the special stains stain removers and cleaners.
A mattress plays a big part in the human life. The human being spends 1/3 of his or her life in sleep that’s why the quality of sleep becomes really significant. People who sleep well obtain an enormous energy and steady nervous and immune systems that tend to restore during a sleep.
Just take into consideration the fact that a human being sleeps not in the bed, but in the mattress. A bed is just an outfit of a mattress, which depends on the chosen style of a bed-room.
Unfortunately, our observations very often show the situations when a very expensive and beautiful bed owners get unknown quality and origin mattresses.
Such an attitude will redound upon your health. A person, who doesn’t get a good night sleep, can be irritable and tired, makes a lot of mistakes, loses a concentration and a pace of life and above all the bad mattress can lead to painful spine problems and a visit of an orthopedist. Therefore, we see people looking for an orthopedic mattress, however, not everybody understands the meaning of this word. As a rule, a person needs an anatomic mattress. The anatomic mattress assures a comfortable life for a healthy spine.
The anatomic mattress is especially important for children during the period of spine formation. But what is an anatomic mattress? This is a system of spring and other fillers that provide the unbent position of the spine during a sleep. The most wide-spread and classic makes of this kind of mattresses are pocket springs mattresses and latex mattresses containing at least 30% of natural latex. In addition there is a large variety of base fillings: cotton, latex, viscose, highly elastic, ordinary foam, wool etc. The use of extra rigid materials, such as coconut leaf, recycled foam, felt, extra rigid sintepon etc. is not recommended.
Actually, it’s better not to use these materials for your mattress without a doctor’s prescription. Half-woolen interlining as a reworking product is extremely harmful due to occurrence of dust mites that do harm to human respiratory and visual systems. Natural elements of the mattress should have corresponding antibacterial dressing which affects the price of the mattress. The joint stock company Eliza-K doesn’t use any undressed natural elements in the production of the mattresses which can be proved by certain certificates. As a rule, these are the goods that are manufactured in the leading European countries.
The mattress material is of a significant importance. Nowadays manufacturers suggest a material price mix that depends on material composition.
The cheapest: 100% synthetic materials made of polyether, polypropylene, non-woven fibre. Then different % combinations of content of cotton, linen and viscose follow.
Eliza-K uses 7% cotton materials in the production which provides ecological properties and durability of a cover. The public understanding of an orthopedic mattress presumes a rigid mattress. That’s a mistaken opinion. An orthopedic mattress can be rigid to supple depending on which spine region external, internal or lateral has been damaged. For example, a memory foam matteress, hat molds absolutely to the shape of a human body, is used in the process of rehabilitation during the postsurgical period of time to reduce the consequences of a longtime decumbiture.
Lately the usage of the coconut leaf etc. is quite the thing. We would like to warn you one more time against the harm of self diagnosis in such an important issue as your spine. The usage of coconut materials in the developed countries doesn’t exceed 2-3% of all mattresses.
A mattress cover can prolong the life of a mattress. It prolongs the life of the mattress as well as improves it’s properties. For example, we get a good ergonomic product by using a latex or viscose foam mattress cover combined with an ordinary spring mattress. The mattress cover is also very handy while changing the bedding.
Take into account that back pain can be observed up to 3 months after the replacement of a mattress. That’s because our spine needs some certain time to adapt for it’s new shape and the adjustment cycle is individual. Spring mattresses also differ in their rigidity and longevity. A wire of different gauges is used in spring mattresses. In Pocket mattresses ,where every spring has it’s own ohm , 1,4;1,6;1,8;1,9 mm wire is used. More than 1,9mm wire gauge is worth-while in the mattress systems of ponding mattresses. In ordinary mattresses 1,9; 2,15; 2,20; 2,40mm wire is used. Certainly the size and the quantity of springs per square meter determins the longevity and the price of the product.
Eliza-K uses 1,8mm wire English springs in the production of the Pocket mattress and 2,40mm Offmann(Germany) springs for ordinary mattresses. An on-stream mattress should be turned over or rotated at least once in every 6 months. This is due to the fact that every material has a non-recoverable deflection so, to prolong the life of the mattress it is necessary to follow this rule. The product range of Eliza-K meets the needs of every customer. Also it is possible to customize any configuration and structure of the mattress.
Our consultants are ready to help you to make your choice. Our technology has been developing by joining forces of doctors and experts in sleep for 15 years.
The independent pocket springs. The independent pocket springs (256-289 springs per square meter). Cylindrical springs are used, in this case, every spring is located in a special pocket. The pocket is made of extra-heavy vlies. Pocket springs allow the mattress to respond punctately to weight and lineaments of the human body and to distribute a load correctly by supporting the spine and unloading the muscles during the sleep. Bonell springs- are conical springs connected to each other with a help of a spiral wire. These springs distribute the weight of the human body all over the surface, thus, decreasing the unit area pressure.
A layer between the springs and the cover is of great importance. In cheap mattresses synthetic fillers such as foam or struto fibre are used. The more expensive makes contain natural and high-quality artificial materials: latex, coir, sheep wool, memory foam etc.
— is a natural material, obtained in the process of rubber tree juice foaming. Being elastic and tough latex transmits loads to springs, is able to withstand a huge pressure and reshapes perfectly. Latex has been perforated to be able to ‘breathe’. The technology provides the adjustment of rigidity of the mattress, the more meshes the softer the mattress. The high-quality medium rigid mattresses are made of natural latex.
— an ecologically clean modern material. It has an elasticity of the natural latex, moreover, it’s rigidity index is higher. Artificial latex is well ventilated and withstands a huge pressure. It is the most popular filler of the orthopedic mattresses.
A high-tech thermosensitive perforated material that reminds a foam. Memory foam mattresses conform to the contours of the body, repeat and fix every movements of the sleeping person, thus ensuring entire relaxation and comfort during a sleep. A warm layer of a high-quality wool. There are mattresses with one side warmer than another. These products are suitable for our climate — it’s enough to turn over the mattress to feel more comfortable.
The main rules of choosing a mattress Body support — the ability of the mattress to withstand the weight of the body and keep you straight-backed during a sleep. The function of the support in a mattress is performed by a mattress base, this is, a spring box or a latex box. Comfort — the ability of the mattress to conform to the contours of the body to reduce a load on the usual pressure points not to roll over in bed. The comfort is provided by layers of fillers and quilted surface.
In the production of the furniture and mattresses the following types of the foam are used ( it is also known as soft urethane foam): standard, extra-rigid and rigid, soft, super soft, highly elastic, special( non-flammable and viscoelastic). The main advantages of the HR foam (highly elastic) that is used in the products of Eliza-K is elasticity and comfort. The reason for this is the mesh structure that differs from the standard foams. In the ordinary foam the mesh structure is homogeneous – the meshes have the same size and wall thickness. As a result, in case of load they are equally distorted and work equally in the context of resistance to pressure. The HR foam structure is rough and unhomogeneous, the meshes have different sizes and are irregularly scattered over an area, consequently, they respond to load in different ways. If the load is small, only small meshes with a low wall thickness are activated according to the super soft foam effect. The larger the load the larger meshes with a larger resistance to pressure are activated, thus giving a wonderful feeling of comfort. Longevity. Standard foams have got relatively short longevity in the sphere of furniture (from 2 to 8 years),afterwards, they loose their service properties dramatically or even break up at all. HR foam has got more than 15 year-longevity, furthermore, it doesn’t loose it’s service properties practically. Fire resistance. HR foams with a density exceeding 30kg/cum meet the requirements of the fire resistance. It allows the usage of HR foams in the furniture that imposes the requirements of the advanced fire resistance (hospitals, hotels, educational institutions). The main rules of choosing a mattress Body support — the ability of the mattress to withstand the weight of the body and keep you straight-backed during a sleep. The function of the support in a mattress is performed by a mattress base, this is, a spring box or a latex box. Comfort — the ability of the mattress to conform to the contours of the body to reduce a load on the usual pressure points not to roll over in bed. The comfort is provided by layers of fillers and quilted surface. T
The springs framework of the bed should correspond to the mattress to provide the correct support. In some cases the springs framework that doesn’t correspond to the mattress can lead to the cancelation of the guarantee, the damage of the mattress, unsatisfactory characteristics and reduce the longevity of the mattress.
Test the regidity of the mattress, to make sure you feel comfortable. Assure the rigidity is constant in all parts of the mattress.
If you’ve got a full size or king size, make sure your frame has got an adequate sustaining of the center that will prevent from flexure or breakage. If a stain appeared on the mattress, use a soap solution with a cold water or an upholstery shampoo. Use as less water as possible because it’s not recommended to moisten the mattress heavily. Do not use chemicals which can damage the mattress and do harm to your health.
The proper mattress care will help you to keep your mattress in a good condition and to prolong i’ts lifetime significantly. We recommend